DS18 PRO-NS8 8" Shallow Loudspeaker Car Speaker Midrange, 400W Max 8

DS18's new Neodymium shallow speakers were designed to give you maximum loudness and volume all while keeping a nice small framed package. Most neo speakers are full size and take up a good amount of mounting depth, with these new Neo slim speakers, you can get that insane neodymium loudness where there is not much room for full size speakers. This 8" inch neodymium 2" voice coil Mid-Range speaker takes 200w RMS and 400w peak power, so you know they will get loud easily. The 96dB sensitivity rating will be sure to give you plenty of volume as well for years and years of enjoyment. 

HIGHLIGHTS

Neodymium Slim design so now you can get all that neodymium power and volume in a slim frame. 
High efficiency 8 ohm 2 inch voice coil that handles 200w RMS and 400w peak power for extreme loudness and frequency precision. 
Shallow mounting depth of only 2.48 inches, these neodymium midrange speakers can fit almost anywhere you need great sound and max volume

TECHNICAL DATA

Nominal Diameter: 8"/208mm 
Nominal Impedance: 8 Ohms 
RMS Power Handling: 200W 
MAX Power Handling: 400W 
Sensitivity (1w/1m): 96 dB 
Frequency Response: 97Hz - 12KHz 
Recommended Hi Pass Crossover: 160Hz 
Pair or Single: Single  

MOTOR 

Voice Coil Diameter: 2" / 50.8mm
Voice Coil Former Material: KSV 
Winding Material: Copper  
Cone Material: Paper  
Dust Cap Material:  Paper  
Surround Material: Cloth  
Basket Material: Steel  
Basket Color: Glossy Black
Magnet Material: Neodymium 
Magnet Weight: 3.32 Oz 

THIELE & SMALL PARAMETERS  

Equivalent Volume: 5.48L / 0.193ft3 
Excursion (one way): 2 mm 
Free Air Resonance: 120Hz 
Mechanical Factor: 3.781 
Electrical Factor: 0.952 
Total Factor: 0.761 
Mechanical Mass: 13.242g 
Mechanical Compliance: 162m cm/N 
BL Factor: 6.029 
Voice Coil Inductance: 7.011mH 
Cone Area: 213.825 Cm3 
DC Resistance: 6.5 ohms 
Mechanical Mass w/o air: 13.07g 

MEASUREMENTS  

Overall Diameter: 8.2" 
Overall Depth: 2.67" 
Front Mount Baffle Cutout: 7.12" 
Mounting Depth: 2.48" 
Motor Diameter: 4.33"